- Home Page
- Andros - Bonefish 22
- Andros - Cuda 23
- Andros- Tarpon 26
- Andros - Offshore 32
- Inventory - Bay Boats
- Inventory - Electric
- Inventory - Offshore
- Inventory - Outboards
- Inventory - Pleasure
- Inventory - Pontoons
- Inventory - Sail Boats
- Inventory - Skiffs & Jons
- Inventory - Walk Around
- Inventory - Trailers
- Inventory - Yachts
*Available NOW* Twin 2022 Yamaha F300s - $35,000.00
2022 Yamaha F300XCB Digital 4/Stroke Outboards ~ 25" Shaft
These are take offs from a recently repowered 33 offshore boat. Both engines are in good running order. These engines may have some factory warranty. There are NO rigging components included with the engines - all were used on the recent repower including the props. New componentry as well as labor to install can be quoted for additional fee.
Great way to save money over new.
Performance & Features:
- Engine Type: Yamaha F300XCB Four Stroke.
- Horsepower: 300 hp.
- Cylinders: 6.
- Displacement: 4.2 liters (4169cc).
- Shaft Length: 25 inches.
- Fuel Induction System: EFI (Electronic Fuel Injection).
- Controls: DEC (Digital Engine Control).
- Alternator Output: 50 - 70 amps.
- Trim & Tilt: Power.
- Weight: 551 lbs (digital) / 562 lbs (mechanical).
- Fuel Recommendation: 89 Octane.
- Recommended Engine Oil: Yamalube® 4M.
- Fuel Filtration: Yamaha 10-Micron Fuel/Water Separating Filter.
- Features:
- Digital Electric Steering (DES).
- Thrust Enhancing Reverse Exhaust system.
- New cowling design.
- Rerouted exhaust for enhanced reverse thrust.
- Available in Yamaha gray or pearlescent white.
- Helm Master EX integration for features like autopilot and automated modes.
- Full Throttle RPM Range: 5000 - 6000.
- Idling Speed: 650 - 750 r/min.
- Max. Prop Shaft Output: 220.6 kW (300 ps).
- Gear Ratio: 1.75:1.
- Bore x Stroke: 96 x 96mm (3.78 x 3.78 in).
- Compression Ratio: 10.3:
*Pending Sale* Twin 2019 Mercury 350 Verados - $35,000
Mercury 350 HP Supercharged 4/Stroke Outboards ~ 25" Shaft (530 Hours Ea)
530 Hours Each at most recent service on 9/24
These are take offs from a recently repowered 33 offshore boat and have been serviced regularly at Mercury Authorized Service Center. Most recent full service was just done on 9/24. Both engines are in good running order. These engines have no factory warranty, but do include all rigging components, Stainless Steel Mercury Enerita Props, Controls and joystick control unit.
Great way to save money over new.
Specifications for the 2019 Mercury 350 Verado:
- Engine type: Inline 6
- Horsepower: 350
- Full throttle RPM: 5800–6400
- Displacement: 158.5 CID or 2.6 L
- Cylinder configuration: Inline 6 with 24 valves and dual overhead cam (DOHC)
- Starting: Smart Start Electric
- Gearcase ratio: 1.75:1
- Alternator: 70 amp / 882 watt (belt-driven)
- Trim system: Power trim and tilt with SmartCraft programmable tilt
- Dry weight: 668 lbs (lightest model)
- Steering: Electro-hydraulic power steering
- Shaft length: 25 in
The Mercury 350 Verado features:
- An Advanced Mid Section (AMS) mounting system to isolate vibration
- A hydrodynamic gearcase for efficiency and stability at high speeds
Twin 2021 Mercury 350 Verados Warm Fusion
Lower Units
Mercury Stainless Steel Enertia Props
SOLD ~ Twin 2021 Mercury 350 Verados Warm Fusion
Mercury 350 HP Supercharged 4/Stroke Outboards ~ 25" Shaft (303 Hours Ea)
Specifications for the 2021 Mercury 350 Verado:
- Engine type: Inline 6
- Horsepower: 350
- Full throttle RPM: 5800–6400
- Displacement: 158.5 CID or 2.6 L
- Cylinder configuration: Inline 6 with 24 valves and dual overhead cam (DOHC)
- Starting: Smart Start Electric
- Gearcase ratio: 1.75:1
- Alternator: 70 amp / 882 watt (belt-driven)
- Trim system: Power trim and tilt with SmartCraft programmable tilt
- Dry weight: 668 lbs (lightest model)
- Steering: Electro-hydraulic power steering
- Shaft length: 25 in
The Mercury 350 Verado features:
- An Advanced Mid Section (AMS) mounting system to isolate vibration
- A hydrodynamic gearcase for efficiency and stability at high speeds
Twin 2021 Mercury 350 Verados Warm Fusion
SOLD ~ 2018 Yamaha F300XCA
Yamaha 300 HP Digital 4/Stroke Outboard ~ 25" Shaft (577 Hours)
The award-winning 4.2-liter F300 is the king of the V6’s. Weighing in at 562 pound. It’s a top choice for offshore performance.
This motor was a take off from a Repower and has none of the rigging components included or a prop. Prospective buyers will have to supply these or we may assist to outfit them at an additional cost as well as labor and installation. Engine has 577 hours of running time.
General Information
Manufacturer: Yamaha
Model Year: 2018
Model: F300 V6 4.2L Digital
25" Shaft
Model Code: F300XCA
Color: Yamaha Grey
Electrical
Alternator Output70 Amp
Engine
Engine Type V6
Ignition TCI Microcomputer
Starting Electric
Exhaust Through propeller
Measurements
Power 300 Horsepower
Displacement 4,169 Cubic Centimeter
Bore x Stroke 96 x 96 mm (3.78 x 3.78 in)
Shaft Length 25″
Dry Weight 562 lbs
Operational
Steering Digital controls
Fuel Type Unleaded
Use Fresh and Salt Water
Full Throttle RPM Range 5,000 – 6,000 rpm
Fuel Induction EFI
Lubrication Wet sump
Recommended oil – Yamalube® 4M
Oil capacity – 6.3 / 6 L with filter
Cooling Thermostatic control
Gear Ratio 1.75:1
Gear Shift Forward, neutral, reverse
Trim System Power trim and tilt -3° through +16°
Degree of tilt – 67°
Located in Sarasota, Florida can be seen by appointment
